John Deere to use B2 Biodiesel fuel in U.S. Manufacturing Pl

Discussion in 'Planting, growing, nurturing Plants' started by baldcat, Oct 6, 2005.

  1. baldcat

    baldcat Junior Member

    Joined:
    Jul 29, 2005
    Messages:
    452
    Likes Received:
    0
    Trophy Points:
    0
    John Deere has announced that it plans to use B2, a blend of 2 percent biodiesel fuel, as the preferred factory-fill in diesel propelled machines made in the United States.

    "This is a big step forward in confirming our commitment for the use of biodiesel fuel," says Don Borgman, Manager Market Planning and Customer Integration, John Deere Ag Marketing Centre. "Our manufacturing plants in the U.S. will use B2 biodiesel for fuelling tractors, combine harvesters, self-propelled sprayers, and other diesel powered machines."

    Biodiesel is a clean burning alternative fuel produced from domestic renewable resources, like soybean oil. It contains no petroleum but can be blended at any level with petroleum diesel to create a biodiesel blend. B2 fuel is a blend of 2 percent biodiesel with 98 percent petroleum diesel.

    "Working with the National Biodiesel Board (NBB) we are promoting the use of B2 fuel because it is readily available and meets the high quality fuel standards that we have set for our engines, and it is a positive step toward adoption of renewable fuels," says Borgman. "If B2 were used in all diesel engines in the U.S., the United States could displace the equivalent of about 3.75 billion litres of foreign oil per year. That could, in turn, translate to some very significant increases in the demand for crops from which biodiesel is made, like soybeans and other natural fats and oils grown right here in the United States."

    "There will be a transitional stage before all machines have the B2 fuel," explains John Gordon, manager, engine technology and test lab operations, John Deere Power Systems. "Our tractor assembly plant, Waterloo Works, in Waterloo, Iowa and our combine manufacturing plant, Harvester Works, in East Moline, Illinois began using the B2 fuel on March 1, 2005.

    "The other factories will begin using B2 before the end of the year. We will publicise our fuel specs and actively encourage our customers to use the B2 formula in their own operations."

    For more information call into your local John Deere Dealer, visit our fact sheet or the NBB website at https://www.biodiesel.org.
     

Share This Page

-->