Results 1 to 7 of 7
  1. Collapse Details
    Installing a wood stove with hot water jacket and radiators 
    Junior Member
    Join Date
    Jan 2009
    Does anyone have any experience in DIY for this? Once you've bought the stove with the hot water jacket, is it an expensive operation to connect it to an existing electric hot water heater, and to buy a few radiators and run the piping to them?

  2. Collapse Details
    No, in simple terms it is just copper pipe work. I don't know if you can get radiators over here but if you have a look at UK forums, you will get more than enough info. What you will need is a circulating pump that will be thermostat controlled so when your fire heats up to a set temp, the pump will then start running and sending the heat to the radiators. Hope this helps.
    "The only solution to damp, mould and condensation."

  3. Collapse Details
    Just to add to the last post, the ultimate system you are thinking of is in a video, this will explain everything. The next process is cost of materials and your labour..
    "The only solution to damp, mould and condensation."

  4. Collapse Details
    Moderator Terra's Avatar
    Join Date
    May 2007
    Lower Eyre Peninsular Sth Australia
    To connect a wood stove to a HWSystem the storage tank must be higher than the stove , hot water rises up the slope and is replaced by cold , so water will "self circulate" . Be aware that your system will boil easilly so needs to be vented properly to be safe and also there is a danger of scolding hot water and steam in the pipes , i would have a seperate tank that can boil all it likes and use that tank to supply hot water to your existing electric heated tank as water is used from it (hope that makes sense) the electric unit will use no power as the supply water is already hot , this would buffer any chance of scolding .
    The Ladies used to check me out ---- Now they just keep an eye on me !!!

  5. Collapse Details
    Junior Member
    Join Date
    May 2010
    I have a Tedson heat exchanger hooked up to my wood stove and solar hot water this way you can have 'mains pessure'n the hot and cold lines. Works well - finding a plumber to do what I wanted was the hardest part. Have considered radiators but have been told you need a fairly large pump to circulate the water. Info on the Tedson set up here -

  6. Collapse Details
    Another useful related thread, hot water jacket, etc 
    Group for banned users
    Join Date
    May 2011
    This is a rather belated post but for others investigating this area, here is a link to an excellent thread with a bit more information around connecting a wood fire to hot water systems:

    I just visited a someone today who had a hot water jacket fitted to his wood fire flue and he said that it worked well and was much better that the wet back system he had in his previous wood fire which had a coil within the fire box. So if anyone wants to find out where you can get such a hot water jacket to fit to the flue of an existing or new wood heater, here is the link:



  7. Collapse Details
    New Member
    Join Date
    Nov 2011
    you'd better find some professional ones to help you with it/ good luck

Posting Permissions
  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts